Archive for April 4th, 2009

Daily Archive

Sat 4 Apr 2009

Setting Modem ADSL SMC

Posted by harinto under Speedy
No Comments

Default IP: 192.168.2.1

Default password: smcadmin

Setting Bridge

1. Klik WAN

2. Klik ATM PVC

3. Klik VC1

4. Protocol: 1483 Bridging, VLAN: Default, VPI/VCI: 8/81, Encapsulation: LLC, Qos Class: UBR, PCR/SCR/MBS: 4000/4000/10

5. Klik Save Settings

Setting PPPoE

1. Klik WAN

2. Klik ATM PVC

3. Klik VC1

4. Protocol: PPPoE, VPI/VCI: 8/81, Encapsulation: LLC, QoS Class: UBR, PCR/SCR/MBS: 4000/4000/10, IP assigned by ISP: Yes, IP Address: 0.0.0.0, Subnet Mask: 0.0.0.0, Connect Type: Always Connected, Idle Time (Minute): 5, Username: (nmrspeedy@telkom.net), Password: (password speedy), Confirm Password: (ulangi password), MTU: 1492

5. Save Settings

Tags:

 

Sat 4 Apr 2009

Setting Modem ADSL Tecom

Posted by harinto under Speedy
No Comments

AR1031

Default ip: 192.168.1.1

Default username : admin

Default password : admin

Setting Bridge

1. Pilih Advanced Setup

2. Pilih WAN

3. Klik Edit

4. ATM PVC Configuration, VPI=8; VCI=81, Service Category: UBR Without PCR, Next

5. Connection Type Bridging, Encapsulation Mode LLC/SNAP-BRIDGING, Next

6. Centang Enable Bridge Service, Service Name: Speedy, Next

7. WAN Setup – Summary, Save

8. Save/Reboot

Setting PPPoE

1. Pilih Advanced Setup

2. Pilih WAN

3. Klik Edit

4. ATM PVC Configuration, VPI=8; VCI=81, Service Category: UBR Without PCR, Next

5. Connection Type PPP over Ethernet (PPPoE), Encapsulation Mode LLC/SNAP-BRIDGING, Next

6. Masukkan PPP Username: (nmrspeedy@telkom.net); PPP Password: (password speedy); PPPoE Service Name: Speedy, Next

7. Centang Enable WAN Service, Service Name: Speedy, Next

8. WAN Setup – Summary, Save

9. Save/Reboot

Tags:

 

Sat 4 Apr 2009

Setting Modem ADSL Zyxel

Posted by harinto under Speedy
No Comments

P-660R

Default IP: 192.168.1.1
Default username : admin
Default password : 1234

Setting Bridge
1. Pilih Network
2. Pilih WAN
3. Mode: Bridge, Encapsulation: RFC 1483, Multiplexing: LLC, VPI: 8, VCI: 81, Apply
4. Pilih Maintenance
5. Pilih Tools
6. Restart

Setting PPPoE
1. Pilih Network
2. Pilih WAN
3. Mode: Routing, Encapsulation: PPPoE, Username: (nmrspeedy@telkom.net), Password: (password speedy), Service Name: Speedy, Multiplexing: LLC, VPI: 8, VCI: 81, IP Address: Obtain an IP Address Automatically, Connection: Nailed-Up Connnection, Apply
4. Pilih Maintenance
5. Pilih Tools
6. Restart

Tags: